Optex Wireless Annunciator 1000: Driveway, Front Door, Retail Store & Pool Alarm

1000' Solar Powered Wireless Driveway Monitor With Magnetometer Sensor

This improved solar powered Wireless Driveway Monitor detects when a vehicle enters or leaves your driveway. It uses a solar powered patented magnetometer sensor system. Movement of any large metallic (iron or steel) object close to the driveway sensor will transmit a signal to the receiver, causing the receiver to chime and flash. People, animals and shadows will not trigger the driveway sensor. The sensor may be placed up to 1000 feet (line of sight) away from the receiver in your Home or Office

Solar Driveway Alarm STI

Additional sensors (MCM# 82-13616) may be required for wide driveways or to monitor an additional driveway.

Features:

Alerts you when a vehicle is coming up your driveway
Indoor AC-powered receiver chimes and flashes when a vehicle approaches
Sensor is solar powered
Receiver plugs into a standard electrical outlet (indoor use only)
Operates with up to 1000 feet (line of sight) between sensor and receiver
Easy installation - mount the sensor next to your driveway on the included stake and plug the receiver into any electrical wall outlet inside your home
No difficult underground wiring
Additional sensor(s) will produce a different chime from the receiver when triggered
When a vehicle activates receiver, there is a 10 to 15 second delay for the unit to reset before the next vehicle will be detected
Will not be triggered by animals, people or shadows
Can be set to low, medium or high sensitivity level (factory default is high).
Wireless frequency is 433 MHz
Maximum optimal range for vehicle detection is 12 feet. Additional monitors may be required for driveways exceeding range
Small, rugged, waterproof sensor provides years of reliable service
Multiple sensors and receivers can be used together as a system (up to 16 sets).Perfect for multiple driveways or large homes.
One (1) year warranty from the date of original purchase

Read the PDF

Model	RC-10	RG-10
Description	Chimebox w/ Relay	Single Relay Receiver
Power Source	DC 9V (exclusive AC adapter)	12 ~ 24V AC/DC
Power Consumption	Standby: 1W, Operating: 2W	Standby: 30mA, Operating: 80mA
Chime Tone	3 tone & 1 alarm (optional)
Volume	Adjustable: 0~80dB / 5 levels (Continuous zone: max.)
Relay Output	Max. 1A / 50 VAC or 1A / 24VDC	Max. 1A / 50 VAC or 1A / 24VDC
Output Timer	Selectable: off/1/5/30/60sec/utility output mode	Selectable: 1/5/30/60sec
Status Indicator	Power Indicator: Green LED Zone Indicator: red LED x 3	Power Indicator: Green LED Zone Indicator: red LED x 3
Radio Frequency	418mHz	418mHz
Operating Temperature	15°F ~ 104°F (-10°C ~ 40°C)	15°F ~ 104°F (-10°C ~ 40°C)
Installation Location	Indoor	Indoor
Weight	6.0 oz. (170g)	4.2 oz. (120g)
Accessories	AC adapter x 1 Mounting Screw x 1	Mounting Screw x 1

Model	TD-10	TS-10
Description	Sensor Transmitter	Hand-Held Transmitter
Detection Method	Passive Infrared	Push Button
Detection Pattern	50ft (15m) long range 17ft (5m) fan pattern
Angle Adjustment	90° vertically & ±5° horizontally or ±5° vertically & 90° horizontally
Power Source	9V: alkaline battery	3V: AA x 2 alkaline battery
Battery Life	Approx. 2 years [250 / day at 70°F (20°C)]	Approx. 2 years [100 / day at 70°F (20°C)]
Status Indicator	Red LED	Red LED
Radio Frequency	418mHz	418mHz
Operating Temperature	15°F ~ 120°F (-10°C ~ 50°C)	15°F ~ 120°F (-10°C ~ 50°C)
Water Resistance	IP54	IP43
Installation Location	Outdoor / Indoor	Outdoor / Indoor
Weight	6.3 oz. (180g)	1.4 oz. (40g)
Accessories	Mounting Screw x 2	Belt Clip x 1
	Looking for Dual-Beam Photo Electric Detectors click here	What about a GSM CCTV Cellular Camera click here

1000' Solar Powered Wireless Driveway Monitor With Magnetometer Sensor

ALARMS AND SECURITY PRODUCTS